Our solar pump controllers are designed to optimize use of solar energy. Controller constantly adjust the motor speed based on pump load and available solar irradiation. Maximum power point tracking (MPPT) does the optimum matching of pump output to PV array output throughout the day. One controller is capable to run Permanent Magnet Synchronous Motor (PMSM) and Induction Motor (IM) coupled to either submersible pump or surface pump. Soft starting and smooth speed regulation by controller significantly increase the motor and pump life. This efficient and cost effective controller is ideal for pumping system used in agricultural irrigation, industrial processes, commercial facilities, and residential water supply.
| PARAMETERS | 1 HP | 2 HP | 3 HP | 5 HP | 7.5 HP | 10 HP |
|---|---|---|---|---|---|---|
| PV INPUT | ||||||
| PV Voltage Range | 100-900 VDC | |||||
| Max PV Current | 13 A | 15 A | 15 A | 15 A | 25 A | 25 A |
| MPPT Range | 55-180 VDC | 80-250 VDC | 150-350 VDC | 250-450 VDC | 220-700 VDC | 280-700 VDC |
| Maximum PV Voltage | 200 VDC | 500 VDC | 500 VDC | 500 VDC | 900 VDC | 900 VDC |
| Number of PV Inputs | 1 | |||||
| Max Power | 1000 W | 2000 W | 3000 W | 5000 W | 7500 W | 10000 W |
| PV Start Voltage | 55 VDC | 55 VDC | 55 VDC | 55 VDC | 55 VDC | 55 VDC |
| MOTOR PUMP OUTPUT | ||||||
| Voltage Range | 0-110 VAC | 0-120 VAC | 0-160 VAC | 0-270 VAC | 0-380 VAC | 0-450 VAC |
| Max Current | 10 A | 12.5 A | 13 A | 15 A | 17 A | 20 A |
| Operating Frequency Range | 0-240 Hz | 0-240 Hz | 0-240 Hz | 0-240 Hz | 0-240 Hz | 0-240 Hz |
| Power Factor Range | 0.75 - 1 | |||||
| Motor Types | PMSM, BLDC, ACIM | |||||
| Peak MPPT Efficiency | 99% | |||||
| Protections | Output Short/Open Circuit, Dry Run, Over Temperature, Over/Under Voltage, Over Current, Phase Loss, Reverse Polarity, Unbalance, Thermal Overload (common across all models) | |||||
